Prolink Load Balancing

Hardware

1. PROLINK Load Balancing

2. Mikrotik

3. Proxy

1. Prolink

Config Show


System Configuration Setting
=========================================================================
Firmware: Version : TMH141-A V1023-MB2.4-E
Release Date : Dec 28 2006
Printout Time : SUN JAN 20 01:09:46 2008
Time Zone : GM+08:00
Primary NTP IP: time.nist.gov
Secondary NTP : stdtime.gov.hk
=========================================================
LAN status: IP address : 192.168.1.254
MAC address : 00 :D 0 :D A:00:44:83
Mask : 255.255.255.0
Dhcp status : Disable
Dhcp IP Start : 192.168.1.12 - 192.168.1.20
DNS IP address: 168.95.1.1
=========================================================
DHCP
reserved IP: MAC address IP address
-----------------------------------
=========================================================
WAN status: 1.IP address : 192.168.11.100
Netmask : 255.255.255.0
MAC address : 00.d0.da.00.44.84
Connect To : InterNet
Current status: Enable
Healthy Check : Enable
Type : Static IP
Primary DNS : 192.168.11.254
Secondary DNS : 203.130.193.74
GatewayAddress: 192.168.11.254
Schedule : Disable
---------------------------------------------------------
2.IP address : 192.168.12.100
Netmask : 255.255.255.0
MAC address : 00.d0.da.00.44.85
Connect To : InterNet
Current status: Enable
Healthy Check : Enable
Type : Static IP
Primary DNS : 192.168.12.254
Secondary DNS : 203.130.193.74
GatewayAddress: 192.168.12.254
Schedule : Disable
---------------------------------------------------------
3.IP address : 192.168.13.100
Netmask : 255.255.255.0
MAC address : 00.d0.da.00.44.86
Connect To : InterNet
Current status: Enable
Healthy Check : Enable
Type : Static IP
Primary DNS : 192.168.13.254
Secondary DNS : 203.130.193.74
GatewayAddress: 192.168.13.254
Schedule : Disable
---------------------------------------------------------
4.IP address : 169.254.14.100
Netmask : 255.255.255.0
MAC address : 00.d0.da.00.44.87
Connect To : InterNet
Current status: Disable
Healthy Check : NoDefault
Type : Dynamic IP
Schedule : Disable
=========================================================
Routing setup: Work mode : Basic NAT mode
Static Route :
Network NetMask Gateway Status
-------------------------------------------------------
---------------------------------------------------------
Dynamic Route : Status: Disable
=========================================================
Routing Table: Network NetMask Gateway
---------------------------------------------------
0.0.0.0 0.0.0.0 192.168.13.254
192.168.1.0 255.255.255.0 192.168.1.254
192.168.11.0 255.255.255.0 192.168.11.100
192.168.12.0 255.255.255.0 192.168.12.100
192.168.13.0 255.255.255.0 192.168.13.100
=========================================================
IP Filtering: No. IP address Port Pass/Drop status
-------------------------------------------------------------------------------------------
=========================================================
Remote
IP Filtering: No. IP address Status
---------------------------
=========================================================
DoS Defense: Function Parameter Time of Lock Status
---------------------------------------------------------
Port Scan 1000 5 Enable
TCP SYN Flooding (Wan) 1000 5 Enable
TCP SYN Flooding (Lan) 1000 5 Enable
ICMP Flooding (Wan) 1000 5 Enable
ICMP Flooding (Lan) 1000 5 Enable
UDP Flooding (Wan) 1000 5 Enable
UDP Flooding (Lan) 1000 5 Enable
=========================================================
ALG: Options Status
---------------------------------------------------------
Ipsec Pass Through (Port 500) Disable
PPTP Pass Through (Port 1723) Disable
VOIP Pass Through Disable
=========================================================
Virtual Server: ID Global_Port Local_Port Local_IP_address Status
-----------------------------------------------------
---------------------------------------------------------
Group: StartPort EndPort Local_IP_address TCP/UDP Status
-----------------------------------------------------
=========================================================
Multi-DMZ Host: No. DMZ_Host_IP_address IP_address_from_ISP Status
-----------------------------------------------------
---------------------------------------------------------
Dynamic-IP-DMZ: Wan HOST_IP_address Status
----------------------------------
1 0.0.0.0 Disable
2 0.0.0.0 Disable
3 0.0.0.0 Disable
4 0.0.0.0 Disable
=========================================================
Multi-NAT: No LAN_IP_address NetMask Wan_IP Wan_No
---------------------------------------------------------
=========================================================
Load Balance: Weight Round Robin
Wan 1: 1
Wan 2: 1
Wan 3: 1
Wan 4: 1
=========================================================
Dynamic DNS: Status : Disable
=========================================================
Proxy Server: Status: Disable
=========================================================
Mail Alert : Status: Disable
=========================================================
URL Filtering : Status: Disable
=========================================================
Throughput
Control : Wan DownLoad(kbits/s) UpLoad(kbits/s) Port Usage% Status
---------------------------------------------------------
1. 384 64
---------------------------------------------------------
2. 384 64 80 60 Enable
110 5 Enable
25 5 Enable
21 5 Enable
3128 40 Enable
8080 40 Enable
---------------------------------------------------------
3. 384 64 80 60 Enable
110 5 Enable
25 5 Enable
21 5 Enable
3128 60 Enable
8080 60 Enable
---------------------------------------------------------
4. 0 0
=========================================================
WAN CONTROL:
Special : StartPort EndPort Select-WAN Status
Application ----------------------------------------
0 1000 Wan3 Enable
1000 3127 Wan1 Enable
3128 3128 Wan2 Enable
3129 5049 Wan1 Enable
5050 5061 Wan2 Enable
5062 6660 Wan1 Enable
6661 7000 Wan3 Enable
7001 8079 Wan1 Enable
8080 8080 Wan2 Enable
8081 65176 Wan1 Enable
---------------------------------------------------------
IP binding : No Start-Remote-IP End-Remote-IP StartPort EndPort Select-WAN Status
-------------------------------------------------------------------------
1. 0.0.0.0 0.0.0.0 0 1000 Wan3 Enable
2. 0.0.0.0 0.0.0.0 1000 3127 Wan1 Enable
3. 0.0.0.0 0.0.0.0 3128 3128 Wan2 Enable
4. 0.0.0.0 0.0.0.0 3129 5049 Wan1 Enable
5. 0.0.0.0 0.0.0.0 5050 5061 Wan2 Enable
6. 0.0.0.0 0.0.0.0 5062 6660 Wan1 Enable
7. 0.0.0.0 0.0.0.0 6661 7000 Wan3 Enable
8. 0.0.0.0 0.0.0.0 7001 8079 Wan1 Enable
9. 0.0.0.0 0.0.0.0 8080 8080 Wan2 Enable
10. 0.0.0.0 0.0.0.0 8081 65176 Wan1 Enable
---------------------------------------------------------
Special IP : Start-IP-Address End-IP-Address WAN Status
Assignment --------------------------------------------
=========================================================
QoS IP Control: Local_IP_address DownLoad(kbits) UpLoad(kbits) Wan-Apply Min/Max Status
------------------------------------------------------------------------
=========================================================
Remote Control: Status: Disable
=========================================================
MAC IP binding: Status: Disable
=========================================================================

D-Link Load Balancing

Product Specification

D-Link®, an industry leader in innovative networking solutions, introduces a 4-port router designed for the small business. The DI-LB604 Load Balancing Router embodies the heart of a small business – low overhead and high return on investment. Featuring dual WAN ports and four LAN ports, this router provides consistent network uptime and reliable Ethernet connectivity.

One of the main differentiators the DI-LB604 has from most routers is its dual WAN ports. With the ability to connect up to two Internet connections, the total available bandwidth doubles in capacity and therefore provides a tremendous increase in network efficiency and user productivity. Dual WAN ports also provide a fast-acting failover response mechanism; if one Internet connection goes down, the other automatically takes control to ensure continuous network uptime.

The built-in four-port switch provides computers on the LAN with network connectivity and Internet access. Connect up to four PCs or other networking devices to access company resources and use the Internet. The DI-LB604 is a scalable solution that allows users to add switches as business grows and network needs expand.

The DI-LB604 also features the dual Stateful Packet Inspection (SPI) and Network Address Translation (NAT) firewall with Denial of Service (DoS) attack protection to safeguard your network. This helps keep your network reliable and secure while maximizing the productivity of your network clients. E-mail alerts and a Syslog support ensure that network administrators have the information they need to maintain the network infrastructure. Combine these features with full System Logging, Static DHCP, Access Control List, VPN pass-through, and Network Diagnostic Tools ensures your network is fully protected from malicious attacks and outside intruders.

Setup for the DI-LB604 is straightforward. All the DI-LB604’s settings and configuration can be managed via a web-based utility. Firmware upgrades and automatic notifications are also readily available to ensure the router is always up-to-date.

With businesses becoming increasingly network-dependent, the need to invest in a reliable network solution is crucial. With load balancing capabilities and advanced firewall protection, the D-Link DI-LB604 offers high return on investment for any small business.

Product Specification
WAN

• IEEE 802.3
• IEEE 802.3u
LAN

• 4-port 10/100Mbps RJ-45
• Auto-MDI/MDIX; 802.3/802.3u
Outbound Load Balance & Backup

• Outbound load balance by bytes, packet, & session
• Auto backup connection
Protocols

• Security: NAT, UPAP, CHAP
• Network: TCP/IP, HTTP, DHCP, PPP, UPAP, PPPoE
• Multi-session PPPoE, ICMP, ARP proxy
• Connection: Static IP, Dynamic IP, PPoE, PPTP
VPN

PPTP & IPSec pass through
Firewall
• NAT (Network Address Translation)
• NAPT (Network Address Port Translation)
• DoS (Denial of Service)
• Access control by group
• SPI (Stateful Packet Inspection)
• ICMP filter for WAN
• Ping to Death
• Port Scan
• Packet filter
• URL block
Security
• Admin passwords
• Authentication with UPAP and CHAP for PPPoE
Management
• Management through WAN & LAN port
• HTTP web based management
• Email alert of WAN fail
• Syslog
Application
• Support MSN & Netmeeting
• Support with H.323 VoIP products
• Multi-session PPPoE
• SMTP bind
• SNMP
• UPnP
• NAT status & connection list
• Virtual server
• Multi-DMZ
• MTU changeable for WAN
• Dial-on-demand & Auto-disconnect
• Dynamic DNS
• MAC address clone
• QoS
Firmware upgrade
• HTTP web based download
• TFTP download
Wazranty 1 Year Warranty